Diesel fuels often contain micro organisms. When temperature and water content is in harmony the microbes can grow uncontrolled giving you problems with a clogged fuel system and restricted fuel flow. The engine is not receiving the fuel flow needed to operate properly and you might even risk that the engine stops suddenly. In severe cases there is also the possibility of heavy wear on injector nozzles and injection pump.

The QL fuel decontaminator will help you control the microbial contamination in your fuel. The return flow, already cleaned by the QL fuel decontaminator, will gradually reduce the micro organisms to a minimum. The QL fuel decontaminator works through a patented magnetic system. When the fuel passes through a system of magnets the micro organisms are killed and broken down to small particles that easily pass through the fuel filter and then burn in the engine combustion.

The QL fuel decontaminator is installed between the tank and the fuel filter. Once installed, it works without any further attention. Correctly installed, before the fuel return feed, it will also clean the content in the fuel tank. In this way the return feed recirculates fuel back to the fuel tank via the fuel decontaminator, and up to 97% of the micro organisms are broken down each time it passes through. The QL fuel decontaminator offers a permanent solution to the problem of micro organisms in the fuel.

Material: Aluminium  / Active components: 3 permanent magnets

Note! The l/hour figures refer to the fuel flow to the engine. The fuel flow is calculated by the fuel consumption plus the return feed from the fuel injection pump.